|
Cambridge Technologies |
|---|
Part Number: NLDFT-2-W-L-S120-M40A
The NLDFT-2-W-L-S120-M40A Line Drain is the connector with a female contact which is not normally the live part, however they are fitted with a spring loaded plastic cap that prevents accidental finger touching of the contact, and the connector meets IP2X requirements. Contacts are available to suit cable conductors from 25mm² to 300mm². Connectors rated either 400 amp or 660 amp, can be...
Part Number: NLDFT-2-W-L-S120-M40S
The NLDFT-1-R-L-S120-M40A Line Drain is the connector with a female contact which is not normally the live part, however they are fitted with a spring loaded plastic cap that prevents accidental finger touching of the contact, and the connector meets IP2X requirements. Contacts are available to suit cable conductors from 25mm² to 300mm². Connectors rated either 400 amp or 660 amp, can be...
Part Number: NLDFT-2-W-L-C240-M40B
The NLDFT-1-R-L-S120-M40A Line Drain is the connector with a female contact which is not normally the live part, however they are fitted with a spring loaded plastic cap that prevents accidental finger touching of the contact, and the connector meets IP2X requirements. Contacts are available to suit cable conductors from 25mm² to 300mm². Connectors rated either 400 amp or 660 amp, can be...
Part Number: NPS-2-BK-T4
The NPS-2-W-T4 Panel Source connectors are supplied fully assembled with the male contact having an M12 threaded post, with nut and spring washer for connection to a standard cable lug, or M12 threaded hole for fixing with a bolt. The standard connector is mounted to a panel through 4 fixing holes on the flange, panel cut-out details are shown on the right. As an alternative, the flange...
Part Number: NPS-2-R-T4
The NPS-2-W-T4 Panel Source connectors are supplied fully assembled with the male contact having an M12 threaded post, with nut and spring washer for connection to a standard cable lug, or M12 threaded hole for fixing with a bolt. The standard connector is mounted to a panel through 4 fixing holes on the flange, panel cut-out details are shown on the right. As an alternative, the flange...
Part Number: NPS-2-W-T4
The NPS-2-W-T4 Panel Source connectors are supplied fully assembled with the male contact having an M12 threaded post, with nut and spring washer for connection to a standard cable lug, or M12 threaded hole for fixing with a bolt. The standard connector is mounted to a panel through 4 fixing holes on the flange, panel cut-out details are shown on the right. As an alternative, the flange...
