|
Cambridge Technologies |
|---|
Part Number: NLDFT-1-R-L-S120-M40A
The NLDFT-1-R-L-S120-M40A Line Drain is the connector with a female contact which is not normally the live part, however they are fitted with a spring loaded plastic cap that prevents accidental finger touching of the contact, and the connector meets IP2X requirements. Contacts are available to suit cable conductors from 25mm˛ to 300mm˛. Connectors rated either 400 amp or 660 amp, can be...
Part Number: NLDFT-1-R-L-S120-M40S
The NLDFT-1-R-L-S120-M40A Line Drain is the connector with a female contact which is not normally the live part, however they are fitted with a spring loaded plastic cap that prevents accidental finger touching of the contact, and the connector meets IP2X requirements. Contacts are available to suit cable conductors from 25mm˛ to 300mm˛. Connectors rated either 400 amp or 660 amp, can be...
Part Number: NLS-1-R-C240-M40B
Line Source is the connector with a male contact which is normally connected to the source of the power. The contacts are fitted with a plastic end cap that prevents accidental finger touching of live parts of the connector and meets IP2X requirements. Different contacts are available to suit cable conductors from 25 mm2 to 300 mm2. Connectors rated either 400 amp or 660 amp, can be...
Part Number: NLS-1-R-S120-M40A
Line Source is the connector with a male contact which is normally connected to the source of the power. The contacts are fitted with a plastic end cap that prevents accidental finger touching of live parts of the connector and meets IP2X requirements. Different contacts are available to suit cable conductors from 25 mm2 to 300 mm2. Connectors rated either 400 amp or 660 amp, can be...
Part Number: NPS-1-BK-H6
The NPS-1-R-T4 Panel Source connectors are supplied fully assembled with the male contact having an M12 threaded post, with nut and spring washer for connection to a standard cable lug, or M12 threaded hole for fixing with a bolt. The standard connector is mounted to a panel through 4 fixing holes on the flange, panel cut-out details are shown on the right. As an alternative, the flange...
Part Number: NPS-1-BK-T4
The NPS-1-R-T4 Panel Source connectors are supplied fully assembled with the male contact having an M12 threaded post, with nut and spring washer for connection to a standard cable lug, or M12 threaded hole for fixing with a bolt. The standard connector is mounted to a panel through 4 fixing holes on the flange, panel cut-out details are shown on the right. As an alternative, the flange...
Part Number: NPS-1-R-T4
The NPS-1-R-T4 Panel Source connectors are supplied fully assembled with the male contact having an M12 threaded post, with nut and spring washer for connection to a standard cable lug, or M12 threaded hole for fixing with a bolt. The standard connector is mounted to a panel through 4 fixing holes on the flange, panel cut-out details are shown on the right. As an alternative, the flange...
