Commercial UL/CSA Wires
UL and CSA approved wires have been tested to Underwriters Laboratories and / or the Canadian Standards Association safety standards. In many cases, a single Thermax part number may meet several UL or CSA standards, as noted on the product specification.
Standard colors: Where noted on product pages, UL wires are available with insulation in any of these ten standard colors: Black, brown, red, orange, yellow, green, blue, violet, grey, and white.
|
UL 1164, 1180; CSA 300V Wire- Extruded PTFE Insulation (Thin wall)
|
UL 1815; CSA 300V Wire- Extruded PTFE Insulation (Thin wall)
|
|
UL 1198, 1199; CSA 600V Wire- Extruded PTFE Insulation (Heavy wall)
|
UL 10086; CSA 600V Wire- 200ºC, Tefzel® 750 Insulation
|
|
UL 1212, 1213; CSA 150V Wire- Extruded PTFE Insulation (Low voltage)
|
UL 10109; CSA 300V Wire- 200ºC, Tefzel® 750 Insulation
|
|
UL 1330, 1331; CSA 600V Wire- Extruded FEP Insulation (Heavy wall)
|
UL 3239 High-voltage Lead Wire (10 KV) - Extruded Modified FEP Insulation
|
|
UL 1332, 1333, CSA 300V Wire- Extruded FEP Insulation (Thin wall)
|
UL 5107 (600V) Wire- Ultra-high-temperature, Abrasion Resistant
|
|
UL 1371, 1538 Wire- Extruded PTFE Insulation (Low voltage)
|
UL 5128 (300V) Wire- Ultra-high-temperature, Abrasion Resistant
|
|
UL 1508, 1513, 1516, 1517, 1523, 1558; CSA 105º 150V Wire
|
UL 5127 (600V) Wire- High-temperature, Abrasion Resistant
|
|
UL 1570; CSA 600V Wire- Mineral-filled PTFE Insulation
|
UL 5180 (300V) Wire- High-temperature, Abrasion Resistant
|
|
UL 1659; CSA 600V Wire- Extruded PTFE Insulation (Heavy wall)
|
PTFE Equipment Wire - BS 3G 210, NEMA nad MIL-W-16878
|
|
UL 1726; 300V Wire- Extruded PFA Insulation (Thin wall)
|
|
|
UL 1727; 600V Wire- Extruded PFA Insulation (Thick wall)
|
|
